With the arrival of 5G, the need for high-speed, high-density fiber optic transmission is becoming more and more urgent. Upgrading a one-dimensional fiber array to a two-dimensional fiber array (2D Fiber Array, Fiber Face Array, 2-D Fiber Array) allows users to accommodate more fibers in the same space, thus achieving higher density signal transmission.
2D fiber array coupled with laser, can be multiple laser through the 2D fiber array dense, precise, miniaturized arrangement, so as to achieve the laser surface array transmission.
Fiber optic surface array coupled with detector can realize the need of replacing expensive surface array detector or forming dense and miniaturized surface array detector by passing single detector through 2D fiber array.
According to the customer's demand, our company has introduced high precision fiber optic surface array with a period accuracy better than 1um, and the arrangement period in both X-axis and Y-axis directions can be adjusted according to the customer's needs. The alignment period in both X-axis and Y-axis directions can be adjusted according to customer needs.
Mainly used for: optical coupling, data transmission, detection scanning.
Product parameter
|
Project
|
Specification
|
Accuracy
|
|
Wavelength
|
190nm-2400nm
|
|
|
Power of fingle fiber
|
≤300W
|
|
|
Fiber arrangement shape
|
Unlimited
|
|
|
Pitch of line Fiber array
|
≥50um
|
±0.0005mm
|
|
Pitch of 2D Fiber array
|
≥80um
|
±0.001mm
|
|
Length of Fiber array
|
≤100m
|
±500mm
|
|
Length of Fiber array
|
≤2m
|
±2mm
|
|
Number of Fiber array
|
300Pcs*300Pcs
|
Dark Fiber Rate ≤ 1%, Accuracy ± 3um
|
|
Number of Fiber array
|
40Pcs*40Pcs
|
Dark fiber ratio 0,
Accuracy ± 1um
|
|
Array end service temperature without vacuum requirement
|
≤800℃
|
|
|
Operating temperature of array end with vacuum requirement
|
≤300℃
|
|
|
Device radiation resistance
|
≤9*10^4rad(Si)
|
|
|
Air leakage rate
|
≤10^-10Pa.m^3/S
|
|
|
Vibration resistance frequency range 50-100 (Hz)
|
15.8g
|
Three-directional sine
|
|
Optical axis parallelism
|
≤1mrad
|
|
|
Fiber array grinding angle
|
≤45°
|
±0.3°
|
